Hakuro Aqua Peeling Machine

Hakuro Aqua Peeling Deep Pore Cleaner is a hot water circulation system to open pores, soften pore dirt, and suck away pore dirt through vacuum heat absorption technology. *Bella Essence water needs to be purchased separately

Product Features

Hakuro bubble machine is a hot water circulation system to open pores, soften pore dirt, and suck pore dirt away through vacuum heat absorption technology.
After cleaning the pores, the water and oxygen circulation system is used to replenish moisture and oxygen to the skin, and finally the pores are tightened through the ice therapy circulation system to lock the moisture and oxygen.
It forms a beauty instrument for deep cleansing and maintaining skin.

• Blackheads can be removed when it is cold and hot
  <Approximately once a week, after 4-6 weeks, there will be obvious results>
• Long-term use, shrink pores, and blackheads will not be repeated

• One instrument instead of 5 beauty instruments-blackhead cleaning instrument, phototherapy skin rejuvenation instrument, facial cleansing instrument, oxygen injection and water replenishing instrument, export and import instrument

• It is also purchase 3 different Bella's essence waters:
  -AS1 Cleansing Exfoliating Essence Water
  -SA2 Cleansing Skin Essence Water
  -AO3 Nutritional Hydrating Essence Water

• Four functional modes can fully solve different skin problems! The process is comfortable, not prone to redness and swelling, and is easy to use!

Simple rejuvenating 4 steps
1. Hot water circulation-soften oily blackheads
2. Vacuum heat suction-Quickly remove dirt <Available standard-strong suction, used with SA2 Cleansing Skin Essence Water>
3. Hydro-oxygen cycle-replenish moisture and oxygen <Available standard-strong suction, use with SA2 Cleansing Skin Essence Water>
4. Ice Therapy Cycle-Tighten and lock water and tighten <Soft suction can be used with AO3 Nutritional Hydrating Essence Water>

Instructions

1. Long press the power button for 1.5 seconds to turn on, long press the "power button" for 1.5 seconds to turn off

2. Function selection: After power on, short press the "power button" to switch between different modes

3. Suction strength: After turning on the machine, short press the "Gear button" to select (soft, standard, strong) 3 suction strengths

4. Try to maintain the instrument at 90 degrees when in use. When the instrument is tilted more than 40 degrees, it will automatically pause, and the red warning light will light up and a warning sound will sound. If the instrument is tilted more than 40 degrees for more than 10 seconds, it will automatically shut down to ensure safety.

5. Mode function introduction:

-Warm export (Warm) "Used with separate water tank" uses red light to wake up the skin, open pores through the hot water circulation system, soften blackheads, acne, oil, cosmetic residues, etc.;

-Vacuum adsorption (Vacuum) uses vacuum heat absorption technology to thoroughly clean softened blackheads, acne, grease, cosmetic residues, etc.;

-Water and oxygen penetration (Cleaning) "Used with an integrated water tank" After the skin pores are cleaned, the water and oxygen circulation system will replenish moisture and oxygen to the skin, making the skin more supple and shiny;

-Ice sensation firming (Ice) "Used with a separate water tank" uses blue light to calm and firm, tighten the pores through the ice therapy circulatory system, lift and tighten, and lock moisture and oxygen


Use time: heat temperature export (3 minutes) + vacuum adsorption (3 minutes) + water and oxygen penetration (4 minutes) + ice firming (3 minutes)


The above 4 modes constitute a complete cleansing step, making facial skin cleansing more convenient and thorough. The skin is more supple and shiny, which helps deepen the improvement of facial skin problems and delay skin aging.
*The effect is better when the pores are opened after the shower

*After cleaning, it is recommended to use a moisturizing mask for better absorption

6. Instrument cleaning: Remove the suction nozzle, replace with a transparent cleaning nozzle, and install an integrated water tank to add an appropriate amount of water; select the cleaning mode, the instrument will automatically shut down after completing the cleaning function.

Product Specifications

Product size: 50mm x 40mm x 205mm
Product weight: 275g